Backup - Draytek Vigor2130 series User Manual

After finishing all the settings here, please click OK to activate them.
4 . 1 . 4 B a c k u p
4 . 1 . 4 B a c k u p
This page is used to setup 3G/56K backup function. If you enable 3G/56K backup, make sure
your WAN connection type is not in 3G/56K mode. When the WAN connection is broken,
router will try to keep the connection with 3G/56K mode. After WAN connection is recovered,
router will disconnect the 3G/56K connection automatically.
If both USB ports connected with 3G modem and 56K modem, and both 3G Backup and 56K
Backup modes are enabled, the system will determine which one (3G Backup or 56K Backup)
will be selected as backup mode according to the detected physical connection automatically.
3 G B a c k u p
3 G B a c k u p
Available settings are explained as follows:
Item
3G Backup
Description
Enable 3G Backup - Check this box to enable such
function.
SIM PIN code - Type PIN code of the SIM card that will
be used to access Internet.
Modem Initial String1/2 - Such value is used to initialize
USB modem. Please use the default value. If you have any
question, please contact to your ISP.
APN Name - APN means Access Point Name which is
provided and required by some ISPs.
Modem Dial String - Such value is used to dial through
USB mode. Please use the default value. If you have any
90
Vigor2130 Series User's Guide