Draytek Vigor2130 series User Manual page 29

Item
After finishing the settings here, please click Next.
P P P o E
P P P o E
PPPoE stands for Point-to-Point Protocol over Ethernet. It relies on two widely accepted
standards: PPP and Ethernet. It connects users through an Ethernet to the Internet with a
common broadband medium, such as a single DSL line, wireless device or cable modem. All
the users over the Ethernet can share a common connection.
PPPoE is used for most of DSL modem users. All local users can share one PPPoE connection
for accessing the Internet. Your service provider will provide you information about user name,
password, and authentication mode.
If your ISP provides you the PPPoE connection, please select PPPoE for this router. The
following page will be shown:
Available settings are explained as follows:
Item
User Name
Password
Redial Policy
Idle Time Out
Vigor2130 Series User's Guide
Description
Description
Assign a specific valid user name provided by the ISP.
Assign a valid password provided by the ISP.
If you want to connect to Internet all the time, you can
choose Always On. Otherwise, choose Connect on
Demand.
Set the timeout for breaking down the Internet after passing
through the time without any action.
21