Trace Route; Routing Table - Draytek Vigor2130 series User Manual

4 . 1 6 . 2 T r a c e R o u
4 . 1 6 . 2 T r a c e R o u
Click Diagnostics and click Trace Route to open the web page. This page allows you to trace
the routes from router to the host. Simply type the IP address of the host in the box and click
Run. The result of route trace will be shown on the screen.
Available settings are explained as follows
Item
IPv4 / IPv6
IP Address / Domain
Start
4 . 1 6 . 3 R o u t i n g T a
4 . 1 6 . 3 R o u t i n g T a
Click Diagnostics and click Routing Table to open the web page.
Each item is explained as follows:
Item
Destination
Gateway
Genmask
Flags
t e
t e
Description
Click IPv4 or IPv6 for performing the ICMP Ping function.
Type in the IP address /domain of the Host/IP that you
want to trace.
Click this button to start the route tracing work. The result
will be displayed on the screen.
b l e
b l e
Description
Display the IP address for destination network or
destination host.
Display the gateway address or "*" if none set.
Display
'255.255.255.255' is for a host destination and '0.0.0.0' is
for the default route.
Different codes represent different routing status.
the netmask for the destination net;
266
Vigor2130 Series User's Guide