Account Code Setup - NEC SL1000 Programming Manual

ISSUE 1.0
Program 35 : SMDR Account Code Setup
Level
IN
Description
Use Program 35-05 : Account Code Setup to set various Account Code options for an extension
Class of Service. Assign a Class of Service to extensions in Program 20-06.
Input Data
Class of Service Number
Item No. Item
01 Account Code Mode
Use this option to select the Account
Code Mode (0 ~ 3).
02 Forced Account Code Toll Call
Setup
Use this option enable Account
Codes for all calls or just toll calls (for
mode 2 or 3 in Item 01 above).
03 Account Codes for Incoming Calls
Use this option to allow users to enter
Account Codes for incoming calls. If
disabled, any codes entered dial out
on the connected trunk.
04 Hiding Account Codes
Use this option to either hide or show
the Account codes on a telephone
display.
Conditions
None
Feature Cross Reference
• Account Code Forced/Verified/Unverified
Programming Manual

35-05 : Account Code Setup

Input Data
0 = Account Codes Disabled (None)
1 = Account Codes optional
2 = Account Codes Required but not verified (No verify)
3 = Account Codes Required and Verified (Verify)
0 = Account Codes for toll and local calls (All)
1 = Account Codes just for toll calls (STD)
0 = Account Codes for incoming calls disabled (No)
1 = Account Codes for incoming calls enabled (Yes)
0 = Account Codes displayed
1 = Account Codes not displayed
SL1000/SL1100
01 ~ 15
Default
0
0
0
0
2-349
Program
35