Service Code Setup (For Service Access) - NEC SL1000 Programming Manual

ISSUE 1.0

11-12 : Service Code Setup (for Service Access)

Level
IN
Description
Use Program 11-12 : Service Code Setup (for Service Access) to customize the Service Codes
which are used for service access. You can customize additional Service Codes in Programs 11-10,
11-11, and 11-14 through 11-16.
The following chart shows:
• The number of each code (01 ~ 64).
• The function of the Service Code.
• The type of telephones that can use the Service Code.
• The default entry. For example, dialing (Item 05) cancels a previously set Camp- On.
• Programs that may be affected with the changing the code.
Input Data
Item No. Item
01 Bypass Call
Activating Call Forwarding/Do Not
Disturb Override. This code is avail-
able only if you disable the voice mail
Single Digit dialing code in Program
11-16-09.
02 Conference
03 Override (Off-Hook Signaling)
04 Set Camp-On
05 Cancel Camp-On
06 Switching of Voice Call and Signal
Call
07 Step Call
08 Barge-In
09 Change to STG (Department
Group) All Ring
10 Station Speed Dialing
11 Group Speed Dialing
12 Last Number Dial
13 Saved Number Dial
14 Trunk Group Access
15 Specified Trunk Access
17 Clear Last Number Dialing Data
18 Clear Saved Number Dialing Data
19 Internal Group Paging
20 External Paging
21 Meet-Me Answer to Specified Inter-
nal Paging Group
Programming Manual
Program 11 : System Numbering
Terminals
MLT, SLT
MLT, SLT
MLT, SLT
MLT, SLT
MLT, SLT
MLT, SLT
MLT, SLT
MLT, SLT
MLT, SLT
MLT, SLT
MLT, SLT
MLT, SLT
MLT, SLT
MLT, SLT
MLT, SLT
MLT, SLT
MLT, SLT
MLT, SLT
MLT, SLT
MLT, SLT
SL1000/SL1100
Related
Default
Program
807
826
809
850
870
812
808
810
780 16-02
#2
#4
#5
815
804
#0
876
885
801 31-01-01
803
864 31-02-01
Program
11
Note
2-71