NEC SL1000 Programming Manual page 424

SL1000/SL1100
Item
No.
03 Default Mailbox Category
(Default MB Ctg)
Use this option to specify the category
of mailbox used as the Default Mail-
box.
Program
47
Default Mailbox Number
(Default MB Num)
Use this option to set the Answer Table
Default Mailbox number. InMail uses
the Default Mailbox when an Answer
Schedule is not in effect. By default,
this occurs at all times other than Mon-
day through Friday from 8:30 AM to
5:00 PM.
04 Next Answer Table
When 10 Answer Schedules in an An-
swer Table are not sufficient, use this
option to link two Answer Tables to-
gether. InMail treats the two linked
tables as a single 20 entry Answer
Table.
Conditions
None
2-402
Item
• If the Default Mailbox is a Sub-
scriber Mailbox, the outside caller
hears the mailbox greeting (if re-
corded) and can leave a message.
• If the Default Mailbox is a Master
Mailbox, the outside caller hears
the recorded announcement. De-
pending on how the Announcement
Mailbox is programmed, InMail
then hangs up, reroutes the call, or
provides additional dialing options.
• If the Default Mailbox is a Routing
Mailbox, the outside caller hears
the instruction menu and can dial
any option allowed by the associ-
ated Dial Action Table.
If any of the Input Data val-
ues are entered, the terminal
displays the Override Mail-
box Number selection (be-
low). If any of the Input Data
values are entered, the termi-
nal displays the Override
Mailbox Number selection
(below).
Input Data Default
0 = Undefined Answer Table
1 = Subscriber Mailbox 1 = 3
- STA Answer Table
2 = Master Mailbox 2 ~ 8 = 0
3 = Routing Mailbox
Up to 3 digits (using 0 ~ Answer Table
9) 1 = 1
Answer Table
2 ~ 8 = No
setting
Answer Table (0 ~ 8)
0 = Undefined
ISSUE 1.0
Description
Category 0 = Skip Mailbox No.
setting
Category 1 = Mailbox No.
should be 1 ~ 128. refer to
<47-02 : InMail Station Mailbox
Options on page 2-384>
(SL1000)
Category 1 = Mailbox No.
should be 1 ~ 120. refer to
<47-02 : InMail Station Mailbox
Options on page 2-384>
(SL1100)
Category 2 = Mailbox No.
should be 1 ~ 32. refer to
<47-03 : InMail Group Mailbox
Options on page 2-388>
Category 3 = Mailbox No.
should be 1 ~ 32. refer to
<47-07 : InMail Routing Mail-
box Options on page 2-393>
Category 0 = Skip Mailbox No.
setting
Category 1 = Mailbox No.
should be 1 ~ 128. refer to
<47-02 : InMail Station Mailbox
Options on page 2-384>
(SL1000)
Category 1 = Mailbox No.
should be 1 ~ 120. refer to
<47-02 : InMail Station Mailbox
Options on page 2-384>
(SL1100)
Category 2 = Mailbox No.
should be 1 ~ 32. refer to
<47-03 : InMail Group Mailbox
Options on page 2-388>
Category 3 = Mailbox No.
should be 1 ~ 32. refer to
<47-07 : InMail Routing Mail-
box Options on page 2-393>
0
Program 47 : InMail