Call Routing Mailbox Options - NEC SL1000 Programming Manual

ISSUE 1.0
Level
IN
Description
Use Program 47-08 : Call Routing Mailbox Options to set the options for mailboxes assigned as
Call Routing Mailboxes in 47-07-02 : Routing Mailbox Type.
Input Data
Routing Mailbox Number
Item No.
01 Dial Action Table
Use this option to assign the Dial Action Table
to the Call Routing Mailbox. The Dial Action
Table defines the dialing options for the call
Routing Mailbox.
02 Screened Transfer Timeout
(Scrn Trf Timeout)
Use this option to set how long a Screened
Transfer (TRF) from the Automated Attendant
rings an unanswered extension before recall-
ing.
This option has a similar function as Custom-
ize: Mailbox Options: Call Routing: [Call Han-
dling] Options: Delay Rings Before Redirect
Transfer in InMail.
03 Time Limit for Dialing Commands
(Dialing Timeout)
This option determines how long InMail waits
for an Automated Attendant caller to dial be-
fore routing the call to the Timeout destina-
tion.
Be sure your Dial Action Tables have a Tim-
eout action programmed.
If the caller waits too long to dial:
When the associated Dial Action Table has a
Timeout action programmed, the caller routes
to that destination.
When the associated Dial Action Table does
not have a Timeout action programmed, the
Instruction Menu repeats three times and then
InMail hangs up.
04 Fax Detection
Use this option to enable or disable Fax De-
tection for the Call Routing Mailbox. In en-
abled, the InMail Automated Attendant (when
using this Call Routing Mailbox) detects in-
coming fax CNG tone. The fax call then
routes to the company fax machine according
to the setting of 47-01-06 : Fax Extension. If
disabled, the Automated Attendant does not
detect incoming fax calls.
05 Fax Extension
Conditions
None
Programming Manual

47-08 : Call Routing Mailbox Options

Item
1 ~ 16
(Dial Action Table 1 ~ 16)
0 ~ 255 seconds
Entering 0 causes immediate
recall.
0 ~ 99 seconds
Entering 0 causes the Auto-
mated Attendant to immedi-
ately route callers to the
Timeout destination pro-
grammed in the active Dial
Action Table.
0 = No (Disabled)
1 = Yes (Enabled)
Up to four digits (SL1000)
Up to eight digits (SL1100)
Program 47 : InMail
01 ~ 32
Input Data
1 (Dial Action Table 1)
SL1000/SL1100
Program
47
Default
15 seconds
5 seconds
0
No setting
2-395