NEC SL1000 Programming Manual page 147

ISSUE 1.0
Item
Item
No.
09 Caller ID Function - For External
Module
Enable (1) or disable (0) the Caller
ID FSK signal for an external Caller
ID module or a 3rd party vendor
telephone with Caller ID display.
Important:
If voice mail is used, this setting
must be disabled for the system in-
tegration codes to be correct.
With a Single Line Tele-
phone, this must be set to 0
for incoming callers to have
a talk path.
10 Caller ID Name
Determine if an extension user tele-
phone should display the Caller ID
name.
11 Caller ID Type
Determine whether the Caller ID
type is FSK or DTMF.
12 Fixed Cadence
14 Forwarded Caller ID Display Mode
Determine what the display shows
when a multiline terminal receives a
forwarded outside call.
15 Disconnect without dial after
hooking hold
Determine whether or not to discon-
nect a held call when on-hook with-
out any dialing after hooking-hold.
16 Special DTMF Protocol Send
Determine whether or not to send
the extension number of the phone
forwarded to the extension when
Program 15-03-04 is set to Special
(1) and not in the VM group.
Programming Manual
Input Data Default
0 = Disable (Off) 0
1 = Enable (On)
0 = Disable 1
1 = Enable
0 = FSK 0
1 = DTMF
0 = Normal 1
1 = Fixed
0 = Calling Extension 0
Number (Calling)
1 = External Caller ID
(Forward)
0 = Normal 0
1 = Disconnect
0 = No 0
1 = Yes
SL1000/SL1100
Related Pro-
Note
gram
15-03-09
45-01-16
2-125
Program
15