Loop Keys - NEC SL1000 Programming Manual

SL1000/SL1100
Level
IN
Description
Use Program 15-13 : Loop Keys to assign the Loop Key data for each keyset terminal. Loop Keys
Program
can be incoming, outgoing or both ways. Outgoing Loop Keys use the entry in item 1. Incoming Loop
Keys use the entry in item 2. Both Way Loop Keys follow the entries in both item 1 and 2.
15
Input Data
Item No.
01
02
Conditions
• Please set Loop Key at Program 15-07 before setting Program 15-13.
Feature Cross Reference
None
2-144
Program 15 : Extension, Basic Setup
Extension Number
Key Number
Item
Outgoing Option
Incoming Option
Maximum four digits (SL1000)
Maximum eight digits (SL1100)
Input Data
0 ~ 25
(0 = Assigns the Loop Key for ARS, 1 ~
25 = Assigns the Loop Key to the trunk
group specified)
0 ~ 25
(0 = Assigns the Loop Key to all trunk
groups,
1 ~ 25 = Assigns the Loop key to the
trunk group specified)
Program 15 : Extension, Basic Setup
ISSUE 1.0

15-13 : Loop Keys

01 ~ 24
Default
0
(Programming Function
Key No. 01 ~ 24)
0
(Programming Function
Key No. 01 ~ 24)