NEC SL1000 Programming Manual page 407

ISSUE 1.0
Item No.
06 Message Retention
Use this option to determine how long a Subscriber
Mailbox retains held and saved messages. If a mes-
sage is left in a Subscriber Mailbox longer than this
interval, InMail deletes it.
07 Recording Conversation Beep
(Rec Conv Beep)
Use this option to enable or disable the Conversa-
tion Record beep. If enabled, all parties on a call
hear the voice prompt "Recording", followed by a
single beep when the extension user initiates Con-
versation Record. If disabled, the voice prompt and
beep do not occur. When you disable the Conversa-
tion Record beep, the following voice prompts do not
occur while InMail records the conversation:
Recording
(followed by a beep)
That mailbox is full
(if the mailbox message storage capacity is
reached)
You have reached the recording limit
(if the recorded message is too long)
Provides an additional Conversation Record beep.
This beep repeats according to the setting of Pro-
gram 45-01-06 : Voice Mail Integration Options :
Record Alert Tone Interval Time (0 ~ 64800 sec-
onds). To disable the Conversation Record beep,
enter 0 for this option.
08 Message Waiting Lamp
(Update MW Lamp)
Use this option to enable or disable Message Wait-
ing lamping at the extension associated with the
Subscriber mailbox. For Subscriber Mailboxes, you
should leave this option enabled. For Guest Mail-
boxes, you should leave this option disabled.
09 Auto Attendant Direct to Voice Mail
(Auto-ATT DND)
Use this option to enable or disable Auto Attendant
Do Not Disturb. When a subscriber enables Auto
Attendant Do Not Disturb, an Automated Attendant
caller routes directly to the mailbox, hears the greet-
ing, and is asked to leave a message. A subscriber
can also enable Auto Attendant Do Not Disturb while
recording their mailbox greeting.
10 Forced Unscreened Transfer
(Forced UTRF)
Use this option to enable or disable Automated At-
tendant Forced Unscreened Transfer for the Sub-
scriber Mailbox. If enabled, each Screened Transfer
(TRF) to the extension is converted to an Un-
screened Transfer (UTRF). If disabled, Screened
Transfers from the Automated Attendant occur nor-
mally.
11 Auto Time Stamp
Use this option to enable or disable Auto Time
Stamp for the Subscriber Mailbox. If enabled, after
the subscriber listens to a message InMail an-
nounces the time and date the message was left.
Auto Time Stamp also announces the message
sender (if known).
A subscriber can also enable Auto Time Stamp from
their mailbox.
12 System Administrator
Use this option to designate the Subscriber Mailbox
as a System Administrator. This allows the sub-
scriber to use the SA options after logging onto their
mailbox.
Programming Manual
Item
0 ~ 99 Days
(0 = Indefinite)
0 = No (Disabled)
1 = Yes (Enabled)
0 = No (Disabled)
1 = Yes (Enabled)
0 = No (Disabled)
1 = Yes (Enabled)
0 = No (Disabled)
1 = Yes (Enabled)
0 = No (Disabled)
1 = Yes (Enabled)
0 = No (Disabled)
1 = Yes (Enabled)
SL1000/SL1100
Input Data Default
Mailbox 1 (200) = 1
Mailbox 2 ~= 0
0
1
Program
47
1
0
0
0
2-385