NEC SL1000 Programming Manual page 538

SL1000/SL1100
Alarm
Type
No.
66 2
67 0
Program
90
68 2
Conditions
• The entire terminal that has an Alarm Display setting can be set at Program 90-50-01.
• System Alarm Type is shown despite the setting done at 90-10-01. If multiple Alarm Display Setting
is set, only one highest priority alarm will be shown on a LCD Display.
• The priority level (highest -> lowest) : Alarm 55 > Alarm 7 > Alarm 5 > Alarm 30 > Alarm 8 > Alarm
52> Alarm 29 > Free Demo License Period.
Feature Cross Reference
None
2-516
Re- Content of
Name
port Alarm
0 SIP exten- More than the num-
sion Li- ber of licenses to
cense which the SIP ex-
Error. tension terminal
was turned on at
REGISTER.
0 SIP illegal The system re-
Packet re- ceived illegal
ceived packet.
0 VoIPDB 1 Provides alert
DSP All when all DSP
Busy Alarm resources are
being used.
2 Used to trouble-
shoot or alerting
when upgrade is
needed.
Cause Action
• Wrong number 1 Confirm the
number of li-
of licenses.
censes for SIP
extension termi-
nals.
2 Check with
maker on un-
certain points.
A client or network Check with maker
was illegal state. on uncertain point,
when happening
frequently when
operating it.
Not enough DSP Install VMDB with
resources in sys- more DSP re-
tem. sources.
Program 90 : Maintenance Program
ISSUE 1.0
Alarm
Recovery Status
When the WAR
number of
registration
of SIP ex-
tension ter-
minals falls
below the
number of
licenses.
INF