Program 15 : Extension, Basic Setup; Basic Extension Data Setup - NEC SL1000 Programming Manual

SL1000/SL1100
Level
SA
Description
Use Program 15-01 : Basic Extension Data Setup to define the basic settings for each extension.
Program
Input Data
15
Item
No.
01 Extension Name
Define the extension/virtual
extension name.
02 Outgoing Trunk Line Pref-
erence
Use this option to set the
extension outgoing Trunk
Line Preference. If enabled,
the extension user receives
trunk dial tone when they lift
the handset. The user hears
trunk dial tone only if allowed
by Trunk Access Map pro-
gramming (Programs 14-07
and 15-06). Refer to the Line
Preference feature for more
details.
03 SMDR Printout
Use this option to include or
exclude the extension in the
SMDR report.
04 ISDN Caller ID
If both Program 15-01-04
and 10-03-05 are enabled,
the system includes Caller
ID in the Setup message as
Presentation Allowed. If
these options are disabled, it
is Presentation Restricted.
05 Restriction for Outgoing
Disable on Incoming Line
Enable or disable supervised
dial detection for an exten-
sion.
07 Do-Not-Call
08 Call Attendant Busy
Message
09 Call Attendant Answer
Message
Conditions
None
2-116

Program 15 : Extension, Basic Setup

Extension Number
Item Input Data
Up to 12 Characters
0 = Off
1 = On
0 = Do not print on
SMDR report
1 = Include on SMDR
report
0 = Disable
1 = Enable
0 = Supervise dial de-
tection
1 = Not supervise dial
detection
0 = Off
1 = On
0 ~ 100
(0 = No setting)
0 ~ 100
(0 = No setting)

15-01 : Basic Extension Data Setup

Maximum four digits (SL1000)
Maximum eight digits (SL1100)
Default
Ext. 200 ~ 327 = No
setting (SL1000)
Ext. 200 ~ 319 = No
setting (SL1100)
0
1
1
0
0
0
0
Program 15 : Extension, Basic Setup
ISSUE 1.0
Related Pro-
Note
gram
14-06
21-02
10-03-05
20-08-13
21-01-15
21-01-16
21-01-17
80-03-01
21-01-19
11-11-59
40-10-08
11-11-60
40-10-09