Ani/Dnis Service Options - NEC SL1000 Programming Manual

ISSUE 1.0
Level
IN
Description
Use Program 34-09 : ANI/DNIS Service Options to define the ANI/DNIS service option setup for
E&M Class of Service.
Input Data
Class of Service
Item
Item
No.
01 Receive Format
Use this option to specify the
format of the ANI/DNIS data
received from the Telco. Make
sure your entry is compatible
with the service the Telco pro-
vides. The character
*
cates a delimiter.
If Program 34-01-02 is
selected to 2 (MF), this
Program works only as
4 = ANI DNIS
* *
02 Delimiter Dial Code
This option defines the charac-
ter Telco uses as a delimiter
(see entries 1 ~ 5 in Item 1
above). Valid entries are 0 ~ 9,
#, and .
*
03 Route Setup of Receive Dial
This option specifies the source
of the data the system uses to
route incoming ANI/DNIS calls.
If option 2 is selected, refer to
Program 34-09-04.
Programming Manual
Program 34 : Tie Line Setup

34-09 : ANI/DNIS Service Options

Input Data
0 = Address
1 = ANI
* *
2 = DNIS
* *
3 = ANI Address
* * *
4 = ANI DNIS
* * *
5 = DNIS ANI
* * *
indi- ( = Delimiter Code)
*
.
*
1 ~ 9, 0, #,
*
0 = Fixed Route (Item 08)
(No Routing)
1 = Routes on Received
DNIS or Address Data
2 = Routes on Received
ANI Data
SL1000/SL1100
01 ~ 15
Default Default
COS 01 COS 02 ~ 15
0 0
* *
0 0
Program
34
Related
Program
34-01-02
34-09-02
34-09-01
22-09-01
22-11-01
34-09-04
34-09-08
2-339