Side Tone Auto Setup - NEC SL1000 Programming Manual

SL1000/SL1100
Level
IN
Description
Note: This program is available only via telephone programming and not through PC Programming.
Program
Use Program 90-68 : Side Tone Auto Setup to setup the volume level of Side Tone for each Analog
90
Trunk Port.
This program will change the setting of "PRG 81-07 CODEC Filter Setup for analog Trunk Port" If the
Analog Port is in used or if it is other than a Analog Trunk Port then it will give out the error message.
Input Data
Item No.
01 Adjustment Start
This will start the
Adjustment of Side
Tone for each Ana-
log Trunk Port. If it is
successful it will
change the PRG
81-07-0. If it is suc-
cessful it will ask to
change it for all Ana-
log Trunk Port.. If
you select to change
the Setting All Ana-
log Trunk Port it will
change all the Port
in 81-07.
02 1 digit data
This setting will ask
to use the digit after
Line is retrieved.
Conditions
None
Feature Cross Reference
None
2-576
Program 90 : Maintenance Program
Item Input Data
Trunk Port Number
001 ~ 126 (SL1000)
001 ~ 096 (SL1100)
Dial (1 dight)

90-68 : Side Tone Auto Setup

Default
No setting
0
Program 90 : Maintenance Program
ISSUE 1.0
Related Program
81-07-01
21-01-05
21-01-06
14-01-07
21-06-06
21-05-07
-