Isdn Bri & Pri Layer 2 (T-Point) Initial Data Setup - NEC SL1000 Programming Manual

ISSUE 1.0
Program 81 : Basic Hardware Setup for Trunk
81-05 : ISDN BRI & PRI Layer 2 (T-Point) Initial Data Setup
Level
MF
Description
Use Program 81-05 : ISDN BRI & PRI Layer 2 (T-Point) Initial Data Setup to define the various
basic data for layer 2 of ISDN BRI and PRI.
Input Data
Item No. Item
01 Timer T200
02 Timer T201
03 Timer T202
04 Timer T203
05 N200
06 N201
07 N202
Conditions
None
Feature Cross Reference
None
Programming Manual
Input Data
1 ~ 255 (100 ~ 25500 ms)
1 ~ 255 (100 ~ 25500 ms)
1 ~ 255 (100 ~ 25500 ms)
1 ~ 255 (100 ~ 25500 ms) 250 (25 sec)
1 ~ 255
1 ~ 65535 (Byte)
1 ~ 255
Default Description
10 (1 sec) Specify the timer value in 1/100ths of a
second at the end of which transmission
of a frame may be initiated.
10 (1 sec) Specify the minimum time in 1/100ths of
a second between retransmissions of
the TEI Identity check messages.
20 (2 sec) Specify the minimum time in 1/100ths of
a second between retransmissions of
the TEI Identity check messages.
Specify the maximum time in 1/100ths
of a second allowed without exchanging
frames.
3 Specify the retransmission count.
260 Specify the frame lengths in ocelots.
3 Specify the maximum number of trans-
missions from a TEI identity request
message when the user requests a TEI.
SL1000/SL1100
Program
81
2-441