Editing A User-Defined Role; Figure 37 Switch Admin:add User Defined Role Dialog - Brocade Communications Systems SN3000B Administrator's Manual

5. Enter a role name in the Name field.
6. Enter a description of the role in the Description field.
7.
8. To grant the role a read privilege, select the privilege and click the right-arrow next to the Read
9. To delete a privilege, select it and click left-arrow.
10. Click OK to save your changes.

Editing a user-defined role

To edit a user-defined role, perform the following steps.
1. Open the Switch Administration window as described in
2. Select the User tab.
3. Select the Role sub-tab.
4. Select an existing user-defined role.
Web Tools Adminstrator's Guide
53-1002152-01
The Switch Admin:Add User Defined Role dialog displays.
FIGURE 37
Switch Admin:Add User Defined Role dialog
To grant the role a read/write privilege, select the privilege and click the right-arrow next to the
Read & Write Privileges section.
You can select multiple privileges.
Privileges section.
You can select multiple privileges.
window" on page 33.
User-defined roles
"Opening the Switch Administration
16
185