List Of Other Optional Components - Konica Minolta bizhub C659 Quick Start Manual

2
No. Name
7 Keyboard Holder KH-
102
8 Fax Kit FK-516
9 Fax Mount Kit MK-742
10 FAX Kit FK-515
11 Mount Kit MK-715
12 Large Capacity Unit
LU-303
13 Large Capacity Unit
LU-205
14 Image Controller IC-
418
15 Clean Unit CU-102
16 Finisher FS-536
17 Finisher FS-536 SD
18 Punch Kit PK-520
19 Relay Unit RU-515
20 Finisher FS-537 SD
21 Finisher FS-537
22 Punch Kit PK-523
23 Z Folding Unit ZU-609
24 Post Inserter PI-507
25 Job Separator JS-602
26 Output Tray OT-508

List of other optional components

The following options are built into this machine and are not shown in the figure.
No. Name
1 Stamp Unit SP-501
2-8
Description
Install this holder to use a external keyboard.
For details on external keyboards, contact your service representa-
tive.
Used to operate this machine as a fax machine. Alternatively, this kit
allows more telephone lines to be connected.
This unit is required to install FAX Kit FK-515.
This option can be used in North America.
Used to add telephone lines.
Fax Mount Kit MK-742 is required to install FAX Kit FK-515.
This option can be used in North America.
Used to print data on banner paper.
Allows you to load up to 3000 sheets of 8-1/2 e 11 (A4) size.
Allows you to load up to 2500 sheets of SRA3 or 11 e 17 (A3) size.
Provides the high-quality printing result.
Video Interface Kit VI-510 is required to install Image Controller IC-
418.
Collects small particles (UFP) generated in this machine to prevent
them from escaping this machine.
Sorts, groups and staples printed paper before outputting it.
To install the Finisher FS-536, the Relay Unit RU-515 is required.
Sorts, groups, staples, folds, and binds printed paper before output-
ting it.
To install the Finisher FS-536 SD, the Relay Unit RU-515 is required.
The Finisher FS-536 contains the Saddle Stitcher.
Install this unit onto the Finisher FS-536/FS-536 SD.
This unit supports the punching function.
This unit is required to install the Finisher FS-537/FS-537 SD/FS-
536/FS-536 SD on this machine.
Sorts, groups, staples, folds, and binds printed paper before output-
ting it.
To install the Finisher FS-537 SD, the Relay Unit RU-515 is required.
The Finisher FS-537 contains the Saddle Stitcher.
Sorts, groups and staples printed paper before outputting it.
To install the Finisher FS-537, the Relay Unit RU-515 is required.
Install this unit onto the Finisher FS-537/FS-537 SD.
This unit supports the punching function.
Install this unit onto the Finisher FS-537/FS-537 SD.
This unit supports the Z-fold function.
Install this unit onto the Finisher FS-537/FS-537 SD.
This unit allows you to insert cover sheets into the copied or printed
sheets. This unit also allows you to manually operate the finisher (only
the lower tray is available).
Install this unit onto the Finisher FS-537/FS-537 SD.
This unit sorts printed sheets.
Outputs printed pages.
Description
Stamps a scanned original when sending a fax. This unit allows you
to check that the original has been scanned.
About this machine
bizhub C759/C659, AccurioPrint C759
2.3