Fusing Entrance Guide Shift; Pressure Roller - Gestetner G056 Service Manual

6.5.3 FUSING ENTRANCE GUIDE SHIFT

[A]
• The entrance guide [A] is adjustable for paper thickness to prevent creasing. The
outer-most screw holes on each side are the factory positions.
• If creasing occurs frequently in the fusing unit, change the entrance guide
position by securing it with the other holes. This allows paper to have more direct
access to the gap between the hot roller and the pressure roller.

6.5.4 PRESSURE ROLLER

• To change the applied pressure, adjust the position of the pressure springs. The
factory setting for the spring position is at the top (minimum pressure).
SM
IMAGE FUSING AND PAPER EXIT
G058R509.WMF
G058D505.WMF
6-23
[A]
G056/G058