Examples For Using The Generic Sample Modem Configuration Files; Customizing The Modem Configuration Files; Ibm 7852-400 Dip Switch Settings - IBM S85 pSeries 680 Service Manual

Examples For Using the Generic Sample Modem Configuration Files

AT&T DataPort 2001 **
Bocamodem 1440E
Hayes Smart Modem
USRobotics 36.6K
Note: ** Ring interrupt only on first ring.

Customizing the Modem Configuration Files

You can create your own modem configuration file(s) or modify the samples provided.
After you customize your modem configuration files, you must access them through the
Configure Remote Maintenance Policy Service Aid rather than from the SP menus.
Note: If you have already set up your serial ports, line speeds, authorizations, and
If you have not already set up your serial ports, line speeds, authorizations, and
telephone numbers from the SP menus, you can set them up with the service aids
while you specify your customized modem configuration files.

IBM 7852-400 DIP Switch Settings

If you are using a 7852-400 modem to enable service processor communications, for
proper operation, the DIP switches must be set according to the following table.
Switch
1
2
3
4
5
6
7
8
Modem Setup Z
X
300
IBM 5841 X
IBM 5843 X
IBM 7851
IBM 7852-10
IBM 7855
Sportster
Zoom V.32
telephone numbers from the SP menus, specify your customized modem
configuration files from the service aid.
Position
Up
Up
Down
Down
Up
Up
Up
Down
Setup Z0 Setup F
(Rare)
Function
Force DTR
Flow Control &E4
Result Codes Enabled
Modem Emulation Disabled
Auto Answer Enabled
Maximum Throughput Enabled
RTS Normal Functions
Enable Command Mode
Appendix G. Modem Configurations
Setup F0 Setup F1
X
X
X
X
X
X
X
621