IBM S85 pSeries 680 Service Manual page 188

Table 5. Firmware Error Codes. (continued)
Error Code Description
25A80100 NVRAM data validation check failed.
25A80201 Unable to expand target partition -
25A80202 Unable to expand target partition -
25A80203 Unable to expand target partition -
25A80210 Setenv/$Setenv parameter error - name
25A80211 Setenv/$Setenv parameter error - value
166
Service Guide
Saving configuration variable.
Writing error log entry.
Writing VPD data.
contains a null character.
contains a null character.
Action/ Possible Failing FRU
Turn off, turn on system unit and retry
the operation before replacing any
system component.
Refer to Action under error code
25A80xxx.
Refer to Action under error code
25A80xxx.
Refer to Action under error code
25A80xxx.
Refer to Action under error code
25A80xxx.
Refer to Action under error code
25A80xxx.
Refer to Action under error code
25A80xxx.