Select Boot Devices; Display Current Settings - IBM S85 pSeries 680 Service Manual

Select Boot Devices

Select this option to view and change the custom boot list, which is the sequence of
devices read at startup time. The boot list can contain five devices.
Select Boot Devices

1 Display Current Settings

2 Restore Default Settings
3 Configure 1st Boot Device
4 Configure 2nd Boot Device
5 Configure 3rd Boot Device
6 Configure 4th Boot Device
7 Configure 5th Boot Device
====>
Display Current Settings
Lists the current order of devices in the boot list. The following is an example of this
screen.
Current Boot Sequence
1. Diskette
2. Ethernet
3. SCSI CD-ROM
4. SCSI 4.5GB Hard Disk
5. SCSI 4.5GB Hard Disk
===>
.------.
|X=Exit|
'------'
id=3 (slot=1)
id=6 (slot=1)
id=5 (slot=5)
.------.
|X=Exit|
'------'
Chapter 8. System Management Services
487