Table of Contents
Advertisement
Table 6. Service Processor Error Codes. (continued)
Error Code Description
4B00F11F System power control network (SPCN)
4B00F120 System power control network (SPCN)
4B00F121 Flash update LID (SPCN LID)
4B00F122 Failed to change the system processor
4B00F123 The system processor configuration has
M0BT0000 The system hung during speaker POST.
182
Service Guide
read VPD access failed.
write VPD access failed.
replacement fault.
configuration.
been changed.
This error code is generated by the
customer performing "Problem
Determination" in the Enterprise Server
S80 pSeries 680 Model S85 User's
Guide.
Action/ Possible Failing FRU
This message appears only in the
service processor error log. If this
message persists, re-IPL to clear logs
and reset programs. Additional
contributors to this condition include:
1. Loose or missing SPCN cables.
2. I/O drawer planar.
3. System rack SPCN card. Location
code: U1.1-P2-X1
4. Service processor
Location: U0.1-P1-X1
This message appears only in the
service processor error log. If this
message persists, re-IPL to clear logs
and reset programs. Additional
contributors to this condition include:
1. Loose or missing SPCN cables.
2. I/O drawer planar.
3. System rack SPCN card. Location
code: U1.1-P2-X1
4. Service processor
Location: U0.1-P1-X1
This message appears only in the
service processor error log. If this
message persists, re-IPL to clear logs
and reset programs. Additional
contributors to this condition include:
1. Bad update image.
2. Loose or missing SPCN cables.
3. Service processor
Location: U0.1-P1-X1
4. I/O drawer planar.
5. System rack SPCN card. Location
code: U1.1-P2-X1
1. Check AIX error log
2. Run system diagnostics and look for
processor card failure.
1. Check AIX error log
2. Run system diagnostics and look for
processor card failure.
Go to "MAP 1540: Minimum
Configuration" on page 117.
Advertisement
Table of Contents
