Select Language; Exiting System Management Services - IBM S85 pSeries 680 Service Manual

Select Language

Select this option to change the language used by the text-based System Management
Services screens and the service processor menus.
Select Language
1. English
2. Francais
3. Deutsch
4. Italiano
5. Espanol
6. Svenska
===>
Note: To correctly display languages other than English, your ASCII terminal must
OK Prompt
This option provides access to the open firmware command prompt. Use the open
firmware command prompt is used to set up an adapter that is not configurable with the
System Management Services. Documentation supplied with an adapter may direct you
to use this option if it is needed. To exit from the open firmware command prompt, type:
reset-all
or turn off the system and reboot.

Exiting System Management Services

After you have finished using the text-based System Management Services, type x (for
exit) when the utilities menu displays to boot your system. Typing x on any other screen
returns you to the previous screen.
support the ISO-8859 character set.
.------.
|X=Exit|
'------'
Chapter 8. System Management Services
489