Safety Notices; Rack Safety Instructions - IBM S85 pSeries 680 Service Manual

Table of Contents

Advertisement

Safety Notices

A danger notice indicates the presence of a hazard that has the potential of causing
death or serious personal injury.
Danger notices appear on the following pages:
v xv
v 88
v 491
v 516
A caution notice indicates the presence of a hazard that has the potential of causing
moderate or minor personal injury.
Caution notices appear on the following pages:
v xv
v xvi
v 88
v 491
v 504
v 505
v 508
v 510
v 512
v 520
Note: For a translation of these notices, see the System Unit Safety Information

Rack Safety Instructions

v Do not install this unit in a rack where the internal rack ambient temperatures will
exceed 40 degrees C.
v Do not install this unit in a rack where the air flow is compromised. Any side, front or
back of the unit used for air flow through the unit must not be in indirect contact with
the rack.
v Care should be taken to ensure that a hazardous condition is not created due to
uneven mechanical loading when installing this unit in a rack. If the rack has a
stabilizer it must be firmly attached before installing or removed this unit.
v This unit requires 3 amp. with an input of 200-240 V ac power. Consideration should
be given to the connection of the equipment to the supply circuit so that overloading
of circuits does not compromise the supply wiring or overcurrent protection.
© Copyright IBM Corp. 1999, 2000
manual, order number SA23-2652.
xiii

Advertisement

Table of Contents
loading

This manual is also suitable for:

Enterprise server s80Pseries 680 s85

Table of Contents