Table of Contents
Advertisement
Table 6. Service Processor Error Codes. (continued)
Error Code Description
4B00F107 Unsupported FLASH update command
4B00F108 Unsupported FLASH update state
4B00F109 Modem on serial port 1 failed to
4B00F10A Modem on serial port 2 failed to
4B00F10B System firmware not loaded
4B00F10C Internal SP program transfer failed
178
Service Guide
configure
configure
(RSP call)
Action/ Possible Failing FRU
This message appears only in service
processor error log. If it persists, re-IPL
to clear logs and reset programs.
This message appears only in service
processor error log. If it persists, re-IPL
to clear logs and reset programs. If the
problem continues, call the support
center for assistance.
1. Check modem power, modem
connections, and modem
configuration. Modem configuration
can be checked using the service
processor menus.
2. Service processor card.
Location: U0.1-P1-X1
1. Check modem power, modem
connections, and modem
configuration. Modem configuration
can be checked using the service
processor menus.
2. Service processor card.
Location: U0.1-P1-X1
This message appears only in service
processor error log. If it persists, re-IPL
to clear logs and reset programs.
Additional contributors to this condition
include:
1. Loose or missing JTAG cable from
service processor to system rack
2. System rack (run diagnostics on
processors and memory)
3. Service processor card.
Location: U0.1-P1-X1
4. If the problem continues, call the
support center for assistance.
This message appears only in service
processor error log. If it persists, re-IPL
to clear logs and reset programs.
Additional contributors to this condition
include:
1. Loose or missing JTAG cable from
service processor to system rack
2. System rack (run diagnostics on
processors and memory)
3. Service processor card.
Location: U0.1-P1-X1
4. If the problem continues, call the
support center for assistance.
Advertisement
Table of Contents
