Advertisement
Quick Links
IBM
Power System S821LC
(8001-12C) Quick Install
IBM
Guide
®
IBM Power
System S821LC (8001-12C) Quick Install Guide
The IBM Knowledge Center is available online from: http://www.ibm.com/support/knowledgecenter/
POWER8/p8hdx/8001_12c_landing.htm.
v Read all precautions and instructions before you start working on key parts.
v Use normal electrostatic discharge (ESD) procedures when working on the system and parts. IBM
recommends wearing gloves and an anti-static wrist strap to avoid possible damage to the equipment.
8001-12C information: https://ibm.biz/8001-12CQR
8001-12C or 8005-12N parts
Use this information to find the field-replaceable unit (FRU) part number.
After you identify the part number of the part that you want to order, go to Advanced Part Exchange
Warranty Service. Registration is required. If you are not able to identify the part number, go to
®
Contacting IBM
service and support.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for IBM Power System S821LC
Summary of Contents for IBM Power System S821LC
- Page 1 Read all precautions and instructions before you start working on key parts. v Use normal electrostatic discharge (ESD) procedures when working on the system and parts. IBM recommends wearing gloves and an anti-static wrist strap to avoid possible damage to the equipment.
- Page 2 Rack final assembly Figure 1. Rack final assembly Table 1. Rack final assembly part numbers Units per Index number Part number assembly Description MCP-290- Slide rail kit - contains left and right slide rails and 00052-0N attaching screws (8001-12C) MCP-290- Slide rail kit - contains left and right slide rails and 00102-0N attaching screws (8005-12N)
-
Page 3: System Parts
System parts Figure 2. System parts Table 2. System parts Index number Part number Units per assembly Description Top cover assembly Screws PCIe adapters. Use the feature type of the adapter to find the FRU number in PCIe adapter information by feature type for the 8001-12C or 8005-12N. - Page 4 Table 2. System parts (continued) Index number Part number Units per assembly Description PCIe adapter. Use the feature type of the adapter to find the FRU number in PCIe adapter information by feature type for the 8001-12C or 8005-12N. AOC-UR-i4XTF 1U UIO NIC PCIe adapter with integrated 4-port 10 GbE Base-T, Intel XL710, and CAPI Note: This PCIe adapter is also a PCIe riser.
- Page 5 Table 2. System parts (continued) Index number Part number Units per assembly Description HDS-KIT-3N-1200- 1.2 TB small form factor NVMe drive (3 drive writes per IB001 day) (8001-12C) HDS-KIT-3N-1600- 1.6 TB small form factor NVMe drive (3 drive writes per IB001 day) (8001-12C) HDS-KIT-3N-2000-...
- Page 6 Additional system parts Figure 3. Additional system parts Table 3. Additional system parts Index number Part number Units per assembly Description MTA9ASF51272PZ- 4 GB, 2400 MHz 1RX8 DDR4 RDIMM (Micron Technology, 2G3B1 Inc.)* (8001-12C) MTA9ASF1G72PZ- 8 GB, 2400 MHz 1RX8 DDR4 RDIMM (Micron Technology, 2G3B1 Inc.)* (8001-12C) MTA18ASF2G72PZ-...
- Page 7 Table 3. Additional system parts (continued) Index number Part number Units per assembly Description M393A1G40DB0- 8 GB, 2133 MHz 1RX4 DDR4 RDIMM (Samsung Electronics Co., Ltd.)* (8001-12C) M393A2G40DB0- 16 GB, 2133 MHz 2RX4 DDR4 RDIMM (Samsung Electronics Co., Ltd.)* (8001-12C) M393A4K40BB0-CPB 16 32 GB, 2133 MHz 2RX4 DDR4 RDIMM (Samsung Electronics Co., Ltd.)* (8001-12C)
-
Page 8: Miscellaneous Parts
Miscellaneous parts Table 4. Miscellaneous parts Description Part number Rail adapter kit for round MCP-290-91904-0N (8005-12N) hole racks Rear ports Figure 4. Rear ports Table 5. Input and output ports Identifier Description USB 2.0 used for keyboard and mouse. Certain USB drives might be too wide to fit properly into the USB ports on the rear of the system. - Page 9 Figure 5. Removing a power supply from the system Figure 6. Releasing and opening the cover Figure 7. Removing a drive Figure 8. Removing the 3.5-inch drive from the tray...
- Page 10 Figure 9. Removing the 2.5-inch drive from the tray Figure 10. Removing the disk drive backplane and screws Figure 11. Disconnecting the drive signal and power cables...
- Page 11 Figure 12. Removing the fan holder Figure 13. Removing a fan Figure 15. Aligning the fan holder Figure 14. Disconnecting the fan cable...
- Page 12 Figure 17. Memory slot locations and plugging sequence Figure 16. Removing the memory DIMM Figure 18. 8001-12C PCIe adapter positions Figure 19. Removing the PCIe riser...
- Page 13 Figure 21. Removing the PCIe riser cards from the adapter cage Figure 20. Removing the PCIe riser screws Figure 22. Removing a PCIe adapter from position 3 of the riser Figure 23. Removing the GPU from the riser...
- Page 14 Figure 24. Processor socket screws on bottom of chassis Figure 25. Screw locations Figure 26. Opening the system processor module packaging Figure 27. Loosening heat sink load arm screw...
- Page 15 Figure 29. Locking the vacuum pen to the system processor module Figure 28. Removing the heat sink Figure 30. Placing the processor at an angle on the top cover of the packaging Figure 31. Lowering the processor into the socket...
- Page 16 Figure 32. Installing the heat sink Figure 33. Tightening the load arm screw Figure 34. Time-of-day battery location This May 10, 2018 edition applies to IBM Power Systems servers that contain the POWER8 processor and to all associated models. © Copyright IBM Corporation 2016, 2017.
Need help?
Do you have a question about the Power System S821LC and is the answer not in the manual?
Questions and answers