Table of Contents
Advertisement
System Power Control Menu
This menu can be used to set power control options. Other menus that control boot
options are available here:
1. Enable/Disable Unattended Start Mode:
2. Reboot/Restart Policy Setup Menu
3. Continue System Boot
4. Power-Off System
5. Boot Mode Menu
98. Return to Previous Menu
99. Exit from Menus
1>
v Enable/Disable Unattended Start Mode
Use this option to instruct the service processor to restore the power state of the
server after a temporary power failure. Unattended start mode which can also be set
through the System Management Services (SMS) menus. is intended to be used on
servers that require automatic power-on after a power failure. For more information,
see "System Power-On Methods" on page 470.
v Reboot/Restart Policy Setup Menu
See "Reboot/Restart Policy Setup Menu" on page 466.
v Continue System Boot
Allows the user to continue with and monitor the system boot already in progress
using the current ASCII terminal as the active console.
Make this selection if you want to monitor the IPL progress messages on your
terminal. If you do not want to monitor the IPL progress messages, select option 99.
Exit from Menus.
v Power off System
Allows the user to power-off the server.
v Boot Mode Menu
See "Boot Mode Menu" on page 467.
456
Service Guide
SYSTEM POWER CONTROL MENU
Currently Enabled
Advertisement
Table of Contents
