Quick Entry Map; Quick Entry Map Table Of Contents - IBM S85 pSeries 680 Service Manual

Symptom
The system stops and a 3-digit number is
displayed in the operator panel display.
The system will not boot.

Quick Entry MAP

Quick Entry MAP Table of Contents

Problem Description
Service Actions
8-Digit Error Codes
System Stops With an 8-Digit Number Displayed
System Stops With a 4-Digit Number Displayed
There Appears to be a Display Problem (Distortion, Blurring,Etc.)
Power and Cooling Problems
Flashing 888 in Operator Panel Display
Other Symptoms or Problems
Symptom
You have parts to exchange or a corrective
action to perform.
You need to verify that a part exchange or
corrective action corrected the problem.
You need to verify correct system operation.
You have an 8-digit error code displayed.
You have a series of 8-digit error codes
displayed, all beginning with the digits "C1" or
"C3". The codes may appear to be repeating.
80
Service Guide
Starting Point
Record SRN 101-xxx, where xxx is the 3-digit
number displayed in the operator panel display,
then go to the Fast Path MAP in the Diagnostic
Information for Multiple Bus Systems.
Go to "Quick Entry MAP".
Action
Service Actions
1. Go to the Removal and Replacement
2. Go to the Repair Checkout Procedure in the
Go to the Repair Checkout Procedure in the
Diagnostic Information for Multiple Bus
Systems.
Go to the System Checkout Procedure in the
Diagnostic Information for Multiple Bus
Systems.
8-Digit Error Codes
Look up the error code in the table in
"Chapter 5. Error Code to FRU Index" on
page 157.
Go to "Chapter 4. Checkpoints" on page 135.
System Stops With an 8-Digit Number Displayed
Procedures.
Diagnostic Information for Multiple Bus
Systems.
Page No.
80
80
80
81
81
81
81
82