IBM S85 pSeries 680 Service Manual page 199

Table 6. Service Processor Error Codes. (continued)
Error Code Description
4B00F00F Call home fault
4B00F010 Service processor logged a fault
4B00F011 System cannot find boot record
4B00F100 Service processor database fault
4B00F101 FLASH update CRC fault
4B00F102 Memory allocation fault
4B00F103 Service processor initialization fault
4B00F104 System mode switch fault
4B00F105 FLASH update fault
4B00F106 FLASH update LID replacement fault
Action/ Possible Failing FRU
1. Check modem power, modem
connections, and modem
configuration. Modem configuration
can be checked using the service
processor menus.
2. Telephone line problem
3. Remote system problem
4. Modem
5. Service processor card.
Location: U0.1-P1-X1
6. I/O planar in primary drawer.
Location: U0.1-P1
Review error logs, beginning with
service processor, then AIX.
Check boot device selections using
SMS utilities. If unable to find the boot
device, go to "MAP 1540: Minimum
Configuration" on page 117.
This message appears only in service
processor error log. If it persists, re-IPL
to clear logs and reset programs.
This message appears only in service
processor error log. If it persists, re-IPL
to clear logs and reset programs.
This message appears only in service
processor error log. If it persists, re-IPL
to clear logs and reset programs.
This message appears only in service
processor error log. If it persists, re-IPL
to clear logs and reset programs.
System rack fault; go to "Entry MAP" on
page 79.
Location: U1
This message appears only in service
processor error log. If it persists, re-IPL
to clear logs and reset programs. Other
contributors to this condition include:
1. Bad update image.
2. Service processor card.
Location: U0.1-P1-X1
This message appears only in service
processor error log. If it persists, re-IPL
to clear logs and reset programs. Other
contributors to this condition include:
1. Bad update image.
2. Service processor card.
Location: U0.1-P1-X1
Chapter 5. Error Code to FRU Index
177