IBM S85 pSeries 680 Service Manual page 222

1xxx
Reference Description/Action
Code
(Perform all actions before exchanging Failing
Items)
6A38 A regulator fault detection failure occurred for
regulator 2.
6A58 Regulator fault
A regulator fault detection failure occurred for
regulator 3. The regulator or the SPCN card can
causes this fault.
7000 Air moving device 1 fault
A problem was detected with an air moving
device, which can be caused by an air moving
device not being installed or operating at the
wrong speed. The SPCN card could be defective.
Change the failing items one at a time.
7001 Air moving device 2 fault
A problem was detected with an air moving
device, which can be caused by an air moving
device not being installed or operating at the
wrong speed. The SPCN card could be defective.
Change the failing items one at a time.
7002 Air moving device 3 fault
A problem was detected with an air moving
device, which can be caused by an air moving
device not being installed or operating at the
wrong speed. The SPCN card could be defective.
Change the failing items one at a time.
7003 Air moving device 4 fault
A problem was detected with an air moving
device, which can be caused by an air moving
device not being installed or operating at the
wrong speed. The SPCN card could be defective.
Change the failing items one at a time.
7101 Power supply failure
The ac power supply module (ac box) reported a
fault.
200
Service Guide
Failing Item
1. Programmable regulator assembly R02
Location: U1.1-P2-V2
2. Go to "MAP 1520: Power" on page 88.
3. ac box
Location: U1.2-V7
1. Programmable regulator assembly R03
Location: U1.1-P2-V3
2. SPCN card
Location: U1.1-P2-X1
3. ac box
Location: U1.2-V7
1. Blower 1, B01
Location: U1.2-F1
2. SPCN card
Location: U1.1-P2-X1
1. Blower 2, B02
Location: U1.2-F2
2. SPCN card
Location: U1.1-P2-X1
1. Blower 3, B03
Location: U1.2-F3
2. SPCN card
Location: U1.1-P2-X1
1. Blower 4, B04
Location: U1.2-F4
2. SPCN card
Location: U1.1-P2-X1
1. ac box
Location: U1.2-V7