OUTBOARD MOTOR INSTALLATION
Electrical, Hoses and Control Cables
IMPORTANT: Warning Horn Requirement – The remote control or key switch as-
sembly must be wired with a warning horn. This warning horn is used with the en-
gine warning system.
Installation Note
Open the front clamp assembly.
Remote Wiring Harness
1. Connect wiring. Place harness into the holder.
BLU/WHT
GRN/WHT
TAN
BRN/WHT
a -
Page 1D-6
BLU/WHT
GRN/WHT
Power Trim Connections
a
57841
58804
90-883728 JULY 2001