Selecting Active Track; Displaying Track; Selecting Track Line Pattern; Deleting Track - Standard Horizon CP150 Owner's Manual

4.7.2 Selecting active Track

'MENU' + "TRACK" + 'ENTER' + "ACTIVE TRK" + 'ENTER'
Select the number of the active Tracks. The default setting is 1.

4.7.3 Displaying Track

'MENU' + "TRACK" + 'ENTER' + "VISIBLE" + 'ENTER'
To enable (On) or disable (Off) the displaying of Track. The default setting is On.

4.7.4 Selecting Track line pattern

'MENU' + "TRACK" + 'ENTER' + "LINE PATTERN" + 'ENTER'
Selects the desired Line Pattern for the active Track.

4.7.5 Deleting Track

'MENU' + "TRACK" + 'ENTER' + "DELETE" + 'ENTER'
Deletes all Track. After pressing 'ENTER' a warning window appears: select "YES"
and press 'ENTER' to confirm (select "NO" otherwise).

4.7.6 Selecting Track memorizing type

'MENU' + "TRACK" + 'ENTER' + "STEP UNIT" + 'ENTER'
Choose Distance (Dist) - the chartplotter can store a fix when the distance from its last
stored position is greater than a defined distance; Time - the chartplotter can store a
fix after a defined time. The default setting is Time.

4.7.7 Selecting distance

'MENU' + "TRACK" + 'ENTER' + "DISTANCE" + 'ENTER'
When the tracking function is On and the type of Track storing is Distance, you can
store a fix when the distance from its last stored position is greater than a defined
distance. Choose in the range 0.01, 0.05, 0.1, 0.5, 1.0, 2.0, 5.0, 10.0 Nm (the distance
unit of measure is selected by the user, see Section 8). The default setting is 0.01 Nm.

4.7.8 Selecting time

'MENU' + "TRACK" + 'ENTER' + "TIME" + 'ENTER'
When the tracking function is On and the type of Track storing is Time, the chartplotter
can store a fix after a defined time. Choose among 1, 5, 10, 30 sec, 1, 5, 10 min. The
default setting is 1 sec.

4.8 USER C-CARD MENU

The chartplotter allows copying information to a User C-CARD. You can also return
GPS Chart 150 Page 49