Placing Cursor On A Route; Mob Function; Inserting Mob; Deleting Mob - Standard Horizon CP150 Owner's Manual

4.5.5 Placing Cursor on a Route

When the Target is set on a Route, placing cursor on it and pressing 'ENTER' shows
an information window with the following options:
1) "STOP" to stop navigation and to remove the current Destination.
2) "NEXT" to move Destination to the next Waypoint of the Route. When the
Destination is on the last Waypoint this option is not present.
3) "PREVIOUS" to move Destination to the previous Waypoint of the Route. When
the Destination is on the first Waypoint this option is not present.
4) "HIGHWAY" to bring up the Highway page (see Section 3.2.3).

4.6 MOB FUNCTION

Is an important function useful in case someone or something falls overboard.

4.6.1 Inserting MOB

Press 'MOB' to place MOB symbol at ship's coordinates:

4.6.2 Deleting MOB

Place cursor on MOB, press 'ENTER, select "DELETE" and press 'ENTER' again.

4.7 USING THE TRACK FUNCTIONS

The chartplotter can be set up to record your Track as you move and for plotting on
the chart.

4.7.1 Enabling Track storing

'MENU' + "TRACK" + 'ENTER' + "TRACKING" + 'ENTER'
To enable (On) or disable (Off) the Track storing. It is not possible to use the Track
storing if you are not receiving a valid fix. The default setting is On.
Page 48
Figure 4.6.1 - Placing MOB
GPS Chart 150