Saving And Starting A New Track; Other Settings In Track Menu; Using The Trip Log - Standard Horizon CP500 Owner's Manual

12" waas gps chart plotter
Hide thumbs Also See for CP500:
Table of Contents

Advertisement

10.0.0 Saving and starting a new Track

A Track is automatically saved to memory. To start a new Track:
1. Press [MENU]. Move the ShuttlePoint knob to highlight USER POINTS and press
[ENT].
2. Move the ShuttlePoint knob to highlight TRACK and press [ENT].
3. Move the ShuttlePoint knob to highlight ACTIVE TRACK and press [ENT] or move the
ShuttlePoint knob to the right.
4. Move the ShuttlePoint knob up/down to select the next available open Track and press
[ENT] or move the ShuttlePoint knob to the right.
5. Move the ShuttlePoint knob to highlight TRACKING and press [ENT]. Move the
ShuttlePoint knob to set On and press [ENT].
6. Press [CLR] or move the ShuttlePoint knob to the left until the Chart page is shown.
7. A new Track now will be laid down.

10.0.1 Other Settings in Track Menu

You will notice the Track menu has other selections:
TRACKING
Allows turning on or off the tracking function
ACTIVE TRACK
This selection allows you to save a Track to one of the 5 Tracks available
VISIBLE
Shows or hides a Track shown in ACTIVE TRACK menu
LINE COLOR
Selects the color of the Track line
DELETE
Deletes a Track selected in the ACTIVE TRACK menu
STEP UNIT
Allowable selection are Distance or Time
DISTANCE
Setup the Distance interval the Track point is placed on the Chart page
TIME
Setup the TIME interval the Track point is placed on the Chart page
10.1

USING THE TRIP LOG

On the Chart, Navigation, Highway and NMEA Data pages the windows may be customized
to show TRIP LOG information.
1. Select one of the pages listed above, press and hold [MENU]. You will notice one of the
data boxes will be highlighted.
2. Press [ENT] and move the ShuttlePoint knob to highlight TRIP LOG, press [ENT].
3. A popup window will be shown with Nm (Nautical Mile), Sm (Statute Mile), Km
(Kilometer) and RESET. Move the ShuttlePoint knob to select the desired units of
measure and press [ENT].
Page 56
Figure 10.0 - Tracking
CP500

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents