Tracing The Clearing Of Storage; Updating Security On A Multi-Media Unit; Figure 8-2 Securing A Unit After Changing Passwords - Honeywell Rapid Eye Administrator's Manual

Tracing the Clearing of Storage

Updating Security on a Multi-Media Unit

Click Update
security to
update the
security
information on
a unit.
Document 800-02953V4 Rev A
03/10
Trace the moment storage clearing happens by making this event an alarm. See
Events on page 210, and Events Defined
changing the Administrator account password.
Caution Clearing of a unit's entire storage or of one of its streams can have a major
impact on that site's security. All recorded video is lost. During the time
that a unit is emptied a Multi-Media unit cannot record video, send alarms,
and so on. Your Multi SA should warn View operators that use of the Clear
Storage and Clear Stream buttons not advisable without first
communicating the reasoning to your organization's security personnel.
Figure 8-2 Securing a Unit after Changing Passwords
1. Use View to start a Maintenance Session
2. Click Update security on the Security tab of a Maintenance Session (see
Information from the Multi db is copied to the Multi-Media unit. Please wait until the
message Updated security appears.
3. You have the option of updating security on other units, and/or ending the
Maintenance Session, as explained in
Rapid Eye Multi-Media DVR System Administrator Guide
on page 205. Prevent future storage clearings by
for the Multi-Media unit.
Ending Maintenance
Tracing
Figure 8-2).
on page 71.
143