Tracing The Clearing Of Storage; Updating Security On A Multi-Media Unit; Figure 8-2 Securing A Unit After Changing Passwords - Honeywell Rapid Eye System Administration Manual

Tracing the Clearing of Storage

Updating Security on a Multi-Media Unit

Click Update
security to
update the
security
information on
a unit.
Document 800-07769 Rev A
02/11
Caution Multi SAs who do not add a password to the Administrator account also
remove a safeguard to prevent inadvertently clearing the storage.
Trace the moment storage clearing happens by making this event an alarm. See
on page 207, and
Events Events Defined
changing the Administrator account password.
Caution Clearing of a unit's entire storage or of one of its streams can have a major
impact on that site's security. All recorded video is lost. During the time
that a unit is emptied a Multi-Media unit cannot record video, send alarms,
and so on. Your Multi SA should warn View operators that use of the Clear
Storage and Clear Stream buttons not advisable without first
communicating the reasoning to your organization's security personnel.
Figure 8-2 Securing a Unit after Changing Passwords
1. Use View to start a
Maintenance Session
2. Click Update security on the Security tab of a Maintenance Session (see
Information from the Multi-Media database is copied to the Rapid Eye unit. Please wait
until the message Updated security appears.
3. You have the option of updating security on other units, and/or ending the
Maintenance Session, as explained in
Rapid Eye DVR System Administrator Guide
on page 203. Prevent future storage clearings by
for the Multi-Media unit.
on page 71.
Ending Maintenance
Tracing
Figure 8-2).
141