Denying Access To A User Of Your Multi System; Figure 10-14 Denying Access And Updating Security For Sites - Honeywell Rapid Eye Administrator's Manual

Security for a Multi-Media System

Denying Access to a User of Your Multi System

214
Stopping Sessions on Units that Use Modems
Multi sessions on a Multi-Media unit that is only accessible by dial-up, cannot be interrupted
in any way other than physically intervening. You must either apprehend the user or unplug
the phone line that connects to the Multi-Media unit's modem. For high security needs, a
remotely controlled telephone line switch can be used.
Dealing with an Open Maintenance Session
These solutions require running a
Session open on a station, a Multi SA's efforts to rectify the situation are hampered. When
creating accounts, you can plan to limit the amount of time that sites can be used by a user
account. See Right to Access a Site
Outside Hackers
To prevent someone who has a copy of Multi software outside of your organization from
accessing your sites, change your system password (see
Caution Honeywell recommends the following procedure as the only expedient
way to deny access to a user.
Figure 10-14 Denying Access and Updating Security for Sites
Maintenance Session. If the user has left a
on page 200 for more information.
System Password
When this option is checked,
this user cannot access any
sites. Update security on each
unit after selecting this option.
Maintenance
on page 184).