11. Configuring Storage Settings; Configuring The Basic Settings; Configuring The Configuring The Basic Settings - Honeywell HRHT4041 User Manual

Performance Series HQA Digital Video Recorder Local User Guide

11. Configuring Storage Settings

This chapter contains the following sections:
• Configuring the Configuring the Basic Settings, page 106
Configuring the Video Recording Schedule, page 107
•
• Configuring HDD Settings, page 110
• Configuring FTP, page 111
• Configuring Record Settings, page 111
Configuring HDD Diagnostic Settings, page 112
•

Configuring the Basic Settings

Go to Main Menu  SETTING  STORAGE  BASIC.
Figure 11-1
HDD Full: Set to Overwrite to continue recording over old data when the HDD is full. Set to
Stop Record to stop recording when the HDD is full. The default setting is Overwrite.
106