Adding An Event Rule For A Data Recording Device; Figure 8-9 Some Devices Can Be Searched For Data Such As No Sale - Honeywell Rapid Eye Administrator's Manual

Adding an Event Rule for a Data Recording Device

Document 800-02953V4 Rev A
03/10
Figure 8-9 Some Devices Can Be Searched for Data Such as No Sale
1. While adding a data recording serial device (as explained in
Device that Sends Data to a
name (for example, No Sale, see
2. In the Event Rule box, enter:
• A code obtained from the manufacturer of the device. For example, a no sale
message from a device is coded as one or more numbers, or text (refer to the
documentation for the device).
- or -
• A regular expression of your choice (see
Regular Expressions
3. Click Add.
4. The default Buffer Size value of 250 bytes should be adequate for most
organizations; however, consider that you may need to use a bigger buffer if any rules
use wildcards (see Table
Buffer Size field so that there are twice as many bytes as there are keystrokes in the
longest rule entered in
5. You have the option of adding more events, as many as 512 different events or
regular expressions can be processed for each data recording device.
Rapid Eye Multi-Media DVR System Administrator Guide
Unit, page 158), select the Event Name box and enter a
Figure 8-9).
Reference for Searching Rules and
on page 160).
8-7). For large rules, change the number of bytes in the
step 2 of this procedure.
Adding a Customer
159