Making Optimized Resolution And Frame Rate Settings; Figure 5-5 Load On Dsp Resources; Figure 5-6 Automatic Dsp Performance Maximization Window - Honeywell Rapid Eye Administrator's Manual

Video Feed Setup
Automatic options
for Performance
Maximization

Making Optimized Resolution and Frame Rate Settings

84
Figure 5-5 Load on DSP Resources
Automatic Display of Maximization Tool
If settings are set too high, the Automatic DSP Performance Maximization window is
displayed (see Figure 5-6).
Figure 5-6 Automatic DSP Performance Maximization Window
The list of optimization options changes, depending on:
• The use of NTSC or PAL equipment.
• The number of cameras connected to the unit. Optimization cannot be used if the
cameras are not connected contiguously. See
In the Automatic DSP Performance Maximization window, double-click an automatic option
(see Figure 5-6).
Manual Display of Maximization Window
To display the Automatic DSP Performance Maximization window, click Configure
Automatic Optimizations, after right-clicking on the Recording tab. See
Optimizing Recorded Video, page 83.
Figure 5-7.