Automatic Clip Of Alarms; Customizing The Storage Of Clips And Stills; Figure 7-2 Changing The Folder For Multi-Media Stills And Clips - Honeywell Rapid Eye Operator's Manual

Clips and Stills

Automatic Clip of Alarms

Customizing the Storage of Clips and Stills

100
You can set View to make a clip automatically during a live alarmed session. The
opportunity to save the clip (or discard it) is offered when the session is closed. See the
Automatic Record for Live Alarm option in
When the View application is shutdown during automatic clip creation, the alarms will not
be automatically rearmed by the application if the automatic rearming of alarms feature is
not selected. Operators will have to manually rearm alarms with an Alarm session.
When View is used to make clips and/or stills, they are stored in the Multi-Media application
folder. The operator has the option of storing them elsewhere.
1. Using View, click the Clips tab.
2. Click Directory.
3. Click the create new folder button,
4. Enter the name of your choice for the stills and clip folder, such as: Multi-Media
Clips and Stills.
5. Double-click the icon of the folder that you have added.
6. Click Open. The folder that you have added and named will hold all clips and stills
made from then on.
Figure 7-2 Changing the Folder for Multi-Media Stills and Clips
Caution Store stills and clips in their own folder. Clips and stills can be erased
routinely after use, making it easy to erase other files by mistake. Storing
clips and stills in a folder other than View's application folder (the default
folder for clips and stills) prevents the deletion of View system files.
Customizing Alarm Handling
.
on page 79.
The REM File in
the Type column
means the clip
was made using
a Rapid Eye
Multi-Media unit.