Removing A User Account; Deleting An Account Used To Access Localview Onsite - Honeywell Rapid Eye Administrator's Manual

Managing User Accounts

Removing a User Account

Deleting an Account Used to Access LocalView Onsite

178
For accounts created using Admin, whether user management is local or central:
1. Using Admin, click the Users tab.
2. Select the user that you want to delete.
3. Do one of the following:
• Click on the toolbar.
• Click Delete in the Actions menu.
Delete
• Press on the keyboard.
4. When you are warned that the user is about to be deleted, click Yes to continue or No
to cancel. A message will warn you if other accounts are based on the account,
offering the option to proceed with—or cancel—the deletion of the account.
Local User Management
For accounts created using LocalView:
1. Using LocalView, click the Configuration tab.
2. Select User Management.
3. Select the user that you want to delete and click Delete.
4. When you are warned that the user is about to be deleted, click Yes to continue or No
to cancel.
Central User Management
When Admin is used to set a unit to Central User Management, LocalView cannot be used
to delete user accounts. After using the
the View application to run a
Multi-Media unit. You also have the option of running a
Security on other units to which the operator had access.
Removing a User Account
Maintenance Session and then Update Security on the
procedure, above, use
Maintenance Session to Update