Alarm Station Operator Requirements; System Administrator Requirements; Adding An Alarm Station Name And Reports - Honeywell Rapid Eye Administrator's Manual

Multi-Media Alarm Stations

Alarm Station Operator Requirements

System Administrator Requirements

Adding an Alarm Station Name and Reports

218
View operators who deal with alarm stations should have the rights to:
• Process alarms. See
Right to Use View on page 200.
• Access the sites that call the alarm station. See
Before your Multi SA designates an alarm station, they need:
• An IP address. The IP address of an alarm station on the same network as the
Multi-Media units (see
• A Telephone number. The telephone number that Multi-Media units dial to reach a
modem on an alarm station. Or,
• Both. For connecting to the modem of a remote access service (RAS) server, your
Multi SA needs the RAS server's telephone number and IP address of the networked
PC used as an alarm station.
Caution Let your network administrator know that alarms are sent to port 10,003.
This port should be left open in your organization's firewall for the sockets
used by Multi alarms. For other ports that may be needed, see the
Eye™ Multi-Media Digital Video Recorder Installation
1. Using Admin, click the Alarm Stations tab.
2. To open the Add Alarm station dialog box (see
station, do one of the following:
• Click on the toolbar.
• Click Add in the Actions menu.
• Right-click the pane and select Add from the menu that appears.
3. Enter a name in the Station Name box.
4. Select the checkbox for each site that reports to the alarm station in the Sites that
Report to this Station field.
5. You are now ready to define a connection (see
operational (see page
Granting More or Less Rights to an Account
Figure 11-2). Or,
Figure
page
233).
on page 175, and
Right to Access a Site on page 200.
Rapid
Guide.
11-1) and start adding an alarm
220) and make the alarm station