Updating Users On System Password Changes; Status Report; Table 10-2 System Password: Status - Honeywell Rapid Eye Administrator's Manual

Updating Users on System Password Changes

Status Report

Document 800-02953V4 Rev A
03/10
3. To update the site's security with the Multi Central database, click Update Security
on the Security tab. You have the option of checking the status of the site's system
password, reported in Admin. See
4. You have the option of ending the
Maintenance on page 71.
5. Repeat step 1 to step 4
The Multi SA needs to tell View operators, who are logged on, to refresh their copy of the
Multi db, or they will not be able to connect to Rapid Eye sites. See
Database on page 277. Note that only users logged on to View 24/7 need to be warned of
this. Refresh is automatic as users log on to use the View application.
System Passwords and Security Status
After changing the System password and synchronizing security at your sites, the Admin
Sites tab reports a yes in the Secure column of each site's line. For other values, see
Table 10-2.
Table 10-2 System Password: Status
Value Action
No needed
No; set needed
Yes; set needed
Yes none needed
Rapid Eye Multi-Media DVR System Administrator Guide
Table 10-2 on page
Maintenance Session, as explained in
for each Multi-Media unit in your system.
Meaning and Recommended Action Details
The worst report in a high security environment. The site
is not secure from unauthorized users. Honeywell
recommends that you assign a system password
immediately and update security on the unit. See
Password on page 184.
The site is not secure from unauthorized users. A system
password has been set using Admin, but security at the
site has not been updated. Run a
the site and update security.
The site is secure, but with another, older System
password. Yes it is protected with an old password,
however, you should set the site to the new password.
Run a Maintenance Session
The optimal report. The site is secure from unauthorized
users. The latest System password is in effect.
187.
Ending
Refreshing a Local
System
Maintenance Session
and update security.
at
187