Physical Removal Of A Site; Other Site-Related Functions - Honeywell Rapid Eye Administrator's Manual

Adding a Site to the Multi Database

Physical Removal of a Site

Other Site-Related Functions

38
1. If a system password is not in use, skip to step 2. If a system password is being used,
remove it before deleting the site; see
2. Right-click a site name. A menu appears.
3. Click Delete.
4. Confirm the deletion.
Note An operator who deletes a site by mistake needs to re-enter that site's
information (see
applied to a Rapid Eye unit and that site is deleted by mistake, you need LVP
(see Last Valid Password
To physically disconnect a Rapid Eye unit from its means of communications, refer to the
Rapid Eye™ Multi-Media Digital Video Recorder Installation
Cameras displays an empty list when adding a site after running a
using View software, Cameras lists the names of the cameras connected to the unit.
LVP. The last valid password utility is used only for replacement units, or for sites that are
mistakenly deleted while a system password is in use.
Caution Do not click LVP. Uninformed use of the LVP utility can make a unit
unusable. See
Change toggles user management. See
To set up a connection, see
To designate alarm stations, see
Removing a System Password
Adding a Site on page 35). If a system password has been
on page 192).
Last Valid Password on page 192.
User Management
Connecting to a Rapid Eye Unit
Addressing Alarms to an Alarm Station
on page 188.
Guide.
Maintenance Session,
on page 169.
on page 41.
on page 57.