Viewing And Changing Modem Settings; Figure 8-7 Serial Devices Tab Showing Internal Port-Modem Data; Table 8-4 Default Modem And Dial-Up Communications Settings - Honeywell Rapid Eye Administrator's Manual

Viewing and Changing Modem Settings

Port icons
Modem icon
For an external
modem, drag the
modem icon to
the port icon.
Document 800-02953V4 Rev A
03/10
1. Continue or start a Maintenance Session
System Operational message appears.
2. Click the Serial Devices tab.
3. Click the Internal Port - Modem icon. Boxes appear in the right half of the Serial
Devices tab (Baud Rate, Wait for Connection, and so on). The box names and their
default values are listed in
4. You have the option of changing the values, as needed.
Figure 8-7 Serial Devices Tab Showing Internal Port-Modem Data
Table 8-4 Default Modem and Dial-Up Communications Settings
Device
Modem hardware
PPP temporary network
Rapid Eye Multi-Media DVR System Administrator Guide
for the Rapid Eye site. Please wait until a
Table 8-4.
Box
Baud
Wait for Connection
Prefix
Initialization
Dialing
Client IP
Host IP
Value
115 200
60
AT
Z
D
172.26.200.1
172.26.2.1
153