Starting Admin; Obtaining A Multi Database; Using The Default Multi Database - Honeywell Rapid Eye Administrator's Manual

Multi Database

Starting Admin

Obtaining a Multi Database

Using the Default Multi Database

264
1. On your desktop, either:
• Click Start on the windows taskbar, select Programs, and then Rapid Eye
Multi-Media. Click Rapid Eye Multi-Media Admin.
- or -
• Double-click the desktop icon for Admin.
2. Then, either:
• Follow Obtaining a Multi Database
• Use a Multi db that is already available. Skip to
To obtain a Multi db after starting Admin, you have the option of:
• Using the default, empty, Multi db. An empty Multi db comes with the software. It is
used to access a unit out of the box. This is a simple way to get started.
• Switching to another Multi db. If you are given a Multi db prepared during the
installation or at some other time (see
• Creating an empty Multi db (see
• Copying a Multi db. You can base a new MS-Access Multi db on an MS-SQL or
MSDE, and vice versa (see
• Upgrading a Multi db. Multi SAs can use a Multi db from their older Multi system (see
Upgrading a Multi Database
The First Time that you Log On
The file name of the default, Multi central database is: REMCentral.mdb. You can locate
it by browsing through the folder holding the Multi software.
on page 264.
Logging On
Converting to Another Database
Creating a Multi Database
Database Based On Another
on page 273).
on page 275.
on page 265).
on page 267).
on page 271).