Resolution Setting; Frame Rate Setting; Table 5-1 Frame Rate Values (Approximate Ips) For Multi-Media Dsp Units - Honeywell Rapid Eye Administrator's Manual
Multi-media digital video recorder
Hide thumbs
Also See for Rapid Eye:
- System administration manual (292 pages) ,
- System administrator manual (264 pages) ,
- Operator's manual (150 pages)
Table of Contents
Advertisement
Video Feed Setup
Resolution Setting
TIP!
Frame Rate Setting
80
1.
On the Recording tab, select a cell in the Resolution column.
2.
Select a value (pixels × pixels) from the list. For comments about the values, see
Optimizing Recorded
page 90. The default values are 320 × 240 (NTSC) and 384 × 288 (PAL).
Honeywell recommends optimizing the resolution of recorded video using the
Automatic DSP Performance Maximization.
Caution
Honeywell does not recommended gauging the resolution of recorded
video based on live video. Live video is always shown at an optimal
resolution that could differ from the recording resolution.
1.
On the Recording tab, click a cell in the Frame Rate column.
2.
Select an images per second (ips) value from the drop-down list that appears. The
default value is 1 ips.
Note
The following frame rate values have been calculated using CIF resolution. If
the resolution is raised, frame rates may have to be lowered.
Table 5-1
Frame Rate Values (Approximate IPS) for Multi-Media DSP Units
NTSC
1
2
PAL
1
2
Frame Rates on Multi-Media and DSP Units
Rapid Eye DSP units.
Rapid Eye DSP units have a maximum frame rate setting of 480 ips
at CIF resolution (for NTSC units, 400 ips for PAL units). This maximum frame rate can be
divided among connected cameras however needed. For example, each of 16 cameras
can be set to 30 ips, or 8 cameras can be set to 60 ips, and so on. To automatically set the
maximum frame rate and resolution of your system, see
Frame Rate Settings
on page 84.
Rapid Eye Multi-Media units.
setting of 120 ips at CIF resolution (for NTSC units, 100 ips for PAL units). This maximum
frame rate can be divided among connected cameras however needed. For example, each
of 16 cameras can be set to 7.5 ips, or 8 cameras can be set to 15 ips, and so on. To
automatically set the maximum frame rate and resolution of your system, see
Optimized Resolution and Frame Rate Settings
Video, page 83, and
Recorded Video Resolution Reference
3
4
5
6
3
4
5
6
Rapid Eye Multi-Media units have a maximum frame rate
on page 84.
7.5
10
15
8
12.5
25
Making Optimized Resolution and
Making
on
30
Hide quick links:
Advertisement
Table of Contents
