Connection Report; Figure 3-17 Site Tab Primary Connections Report; Table 3-4 Automatic Connection Names For A Rapid Eye Site - Honeywell Rapid Eye Administrator's Manual

Connecting to a Rapid Eye Unit

Connection Report

56
Preparation
Use Admin to define the sites as network units (see
can then use a modem to connect to these sites using the Microsoft dial-up application to
connect to the RAS server.
Using an Outside Line Requires a Prefix Number
A prefix is an extra telephone keystroke such as a 9 or an 8 that you should set in the
Windows Telephony program running on the PC.
What Your Network Administrator Needs
Multi sessions (live, retrieval and alarm) are sent to port 10,000. This port should be left
open in your organization's firewall for the sockets used by Multi.
Figure 3-17 Site Tab Primary Connections Report
In the Admin application, the site tab reports the primary connection to a Rapid Eye site (see
Figure 3-17).
Connection Codes
The codes used to identify the primary connection are listed in
Table 3-4 Automatic Connection Names For a Rapid Eye Site
Site Tab Report
(n) IP address
(d) telephone number
(p) telephone number (n) IP address [site name] -> PPP
Setting Up a Connection, page 42). You
Table
Automatic Name Connection
[site name] -> Network network
[site name] -> Dial-up dial-up
dial-up to RAS
Report of unit's
primary connection
3-4.