Storage - Honeywell hus-nvr-1032-e User Manual

Manual Recording
On the Live screen, you can manually start/stop recording on a camera.
Start Manual Recording—Right click the icon of the camera and select RecordManual
Recording.
Stop Manual Recording—Right click the icon of the camera and select RecordStop
Recording.
Panic Recording
When a panic or duress condition occurs, you can start panic recording by using one button
or key. When panic recording is started, all the connected IP cameras start recording.
Perform one of the following two methods to start and stop the panic recording:
•
•

Storage

The "Storage" list displays the disk information. "Disk 01~08" indicate the corresponding disks,
and "e-SATA" indicates the optional eSATA disks. Click
including total size, free space, Read/Write type and status as shown in the following figure:
Figure 5-18 Storage
To refresh the disk information, click
on the Live /Playback screen to start the panic recording; click it again to
Click
stop recording.
Hold down the key on the front panel
panic recording; hold down it again for over 1 second to stop recording.
(Figure 2-1 ) for over 1 second to start the
to view detailed information
.
Honeywell
37